features surge overload rating -175 amperes peak ideal for printed circuit board reliable low cost construction utilizing molded plastic technique plastic material has u/l flammability classification 94v-0 mounting postition:any maximum ratings and electrical characteristics characteristics symbol gbu6005 gbu601 gbu602 gbu604 gbu606 GBU608 gbu610 unit maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward (with heatsink note 2) rectified current @ t c =100 (without heatsink) peak forward surge current 8.3ms single half sine-wave super imposed on rated load (jedec method) maximum forward voltage at 3.0a dc v f v maximum dc reverse current @ t j =25 at rated dc blocking voltage @ t j =125 i 2 t rating for fusing (t<8.3ms) i 2 t a 2 s typical junction capacitance per element (note1) c j pf typical thermal resistance r jc /w operating temperature range t j storage temperature range t stg notes: 1.measured at 1.0mhz and applied reverse voltage of 4.0v dc. 2.device mounted on 75mm*75mm*1.6mm cu plate heatsink. 3. the typical data above is for reference only single phase, half wave ,60hz, resistive or inductive load. rating at 25 ambient temperature unless otherwise specified. reverse voltage - 50 to 1000 volts forward current - 6.0 amperes glass passivated bridge rectifiers dimensions in inches and (milimeters) -55 to +150 i fsm 127 50 2.2 500 a 175 6.0 for capacitive load, derate current by 20% 2.8 gbu6005 thru gbu610 a i r 1.0 i (av) -55 to +150 10.0 a gbu .047(1.2) .035(0.9) .057(1.45) .073(1.85) .680(17.27) .720(18.29) .752(19.1) .720(18.3) .430(10.9) .437(11.1) .392(9.80) .401(10.2) .190 .210 (4.8) (5.3) (5.3) (4.8) .210 .190 .190 .210 (4.8) (5.3) .080(2.03) .065(1.65) .085(2.16) .100(2.54) chamfer .126(3.2)*45 .232(5.9) .213(5.4) .161(4.1) .134(3.4) .860(21.8) .874(22.2) -+ .018(.46) .022(.56) .106(2.7) .091(2.3) .139(3.53) .133(3.37)
rating and charactertic curves gbu6005 thru gbu610 number of cyclets at 60hz peak forward surge current, amper es fig.2-maximum non-repetitive surge current 0 10 100 160 180 1 40 80 120 2 50 20 5 pulse width 8.3ms single half-sine-wave (jedec method) fig.1-forward current derating curve case temperature, c average forward current amperes 60 120 140 0.0 1.0 6.0 100 80 40 20 0 3.0 4.0 2.0 5.0 single phase half wave 60hz resistive or inductive load with heatsink without heatsink fig.3-typical junction capacitance reverse voltage,volts capacitance,(pf) 10.0 100 1.0 1.0 10 100 t j =25c,f=1mh z 1000 100 10 1.0 0.1 020 40 60 80 100 percent of rated peak reverse voltage,(%) instantaneous reverse current ,(ua) fig.5-typical reverse characteristics t j =125c t j =100c t j =50c t j =25c instantaneous forward current, amper es 0.4 0.6 0.8 1.0 1.2 1.4 0.01 0.1 1.0 10.0 20.0 0 0.2 t j =25c fig.4-typical forward characteristics instantaneous forward voltage. volts
|
